AEG Competence 6292D-M Istruzioni per l'uso e l'installazione - Pagina 7

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione AEG Competence 6292D-M. AEG Competence 6292D-M 18.

The carbon filters are neither washable nor reuseable and must be replaced

at maximum every four months.

The saturation of the active carbon filter depends on the frequency of use

of the appliance, by the type of cooking and the regularity of cleaning the

anti-grease filters (Fig 14)

To remove the charcoal filters place on hand on one filter at a time and turn

it toward the front part. The charcoal filter can now be removed. Always

ensure to replace both filters at the same time.

Clean the fan and other surfaces of the cooker hood regularly using a damp

cloth moistened with denatured alcohol or non-abrasive liquid detergent.

The illumination installation is designed for use during cooking and not for

prolonged general illumination of the environment. Prolonged use of the

illumination installation notably reduces the duration of the bulb.

Use a one-edged screwdriver or any other appropriate tool to lift and

remove the overhead light fixture. Replace the damaged lamp. Use only

halogen lamps of a maximum of 20w, avoiding contact with hands. Return

the light fixture to its position (snap fastening). (Fig. 15)

Control Panel – Fig 16

A = TIMER – 15 MINUTES

B = SPEED I / OFF

C = SPEED II / OFF

D = SPEED III / OFF

E = LIGHT

If your appliance does not have the INTENSIVE speed function, press key A for

two seconds and it will be activated for 15 minutes after which it will return to the

previously set speed. When the function is active the LED flashes.

By pressing any key for the exclusion of the hood light the hood will return