ACADEMY Summit Classic Deluxe Tripod 12 Leg Kit Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Accessories ACADEMY Summit Classic Deluxe Tripod 12 Leg Kit. ACADEMY Summit Classic Deluxe Tripod 12 Leg Kit 8.

Stampa la pagina

1. Parts List

LEG ASSEMBLY

1. Carefully lay the completed 81518 top section on its side

- ladder rungs up as shown in figure 1.

2. Position one of the Couple Plates as shown in figure 2.

Slide the plate over the leg and line up the holes. NOTE:

Coupler Plate must line up with the round holes and not the

oval holes.

3. Position one of the Brackets as shown in figure 3. The

bracket should be bolted to the Coupler Plate so that it runs

horizontal when the tripod is sitting upright.

4. Use one

2 3/4" bolt and lock nut

Bracket and Coupler Plate.

5. Position the 12' Ladder Assembly as shown in figure 4.

6. Slide the Assembly into the Coupler Plate and secure

with one,

2 3/4" bolt and lock nut.

2 3/4" BOLT, LOCK NUT -

WRENCH TIGHTEN

to secure both the

COUPLER PLATE

(PN 14061.300)

(see figure 5)

12' LADDER

ASSEMBLY

(PN 14063.1100)

COUPLER PLATE

(PN 14061.300)

BRACKET

(PN 14061.400)

2 3/4" BOLT, LOCK NUT -

WRENCH TIGHTEN

2 3/4" BOLT, LOCK NUT -

WRENCH TIGHTEN

7. Carefully rotate the tripod assembly to gain access to one

of the legs.

8. Slide another Coupler Plate on the Leg and line up the

round holes as shown in figure 6.

9. Position one Bracket as shown in figure 6 and secure

using one

2 3/4" bolt and lock nut.

BRACKET

(PN 14061.400)

PG 3