Kohler K-1142 Manuale di installazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di installazione per Vasche da bagno Kohler K-1142. Kohler K-1142 25. Drop-in acrylic baths
Anche per Kohler K-1142: Manuale di installazione (25 pagine), Manuale di installazione e cura (29 pagine), Manuale di installazione e cura (25 pagine)

Water-Resistant

Wall Material

Bath

7. Complete the Installation

If used, install the optional apron at this time according to the instructions (only applies to select

models) packed with the apron.

Carefully remove the protective tape from the bath rim.

Apply a bead of silicone sealant to the nailing-in ﬂange.

Install water-resistant wall material a maximum of 1/4" (6 mm) above the bath deck.

Seal the joints between the bath rim edges and the water-resistant wall material with silicone

sealant. Tape and mud the water-resistant wall material.

Install the ﬁnished wall. Seal the joints between the bath rim and the ﬁnished wall with silicone

sealant.

Install the faucet trim according to the faucet manufacturer's instructions.

Clean-Up

When cleaning up after installation, do not use abrasive cleaners, as they may scratch and dull the bath

surface. Use warm water and a liquid, non-abrasive detergent to clean the surface.

CAUTION: Risk of product damage. Do not allow cleaners containing petroleum distillates to remain

in contact with the surface for long periods of time.

Remove stubborn stains, paint, or tar with turpentine or paint thinner. Remove plaster by scraping with a

wood edge. Do not use metal scrapers, wire brushes, or other metal tools. You can use a powder-type

detergent on a damp cloth to provide mild abrasive action to any residual plaster.

Kohler Co.

Framing

Finished

Wall

Apply silicone

sealant to the

joint between the

bath and the

finished wall

1016757-2-C