Aqua Creek TIDAL WAVE F-TWPB-06 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Attrezzature per il fitness Aqua Creek TIDAL WAVE F-TWPB-06. Aqua Creek TIDAL WAVE F-TWPB-06 14.

Stampa la pagina

TOOLS REQUIRED

1/2" SOCKET

Attach the pedal assemblies to the

main frame with two (2) 5/16" x 3/4" hex

head bolts, 5/16" lock washers and 5/16"

fl at washers (this hardware is already

pre-installed on the bike).

See FIG. 5 to the right.

NOTES: Viewing from as if sitting on

the bike, be sure the right pedal is

being installed on the right side of the

bike and left pedal on the left side of

the bike! Installing them backwards

could lead to the pedals unthreading

and breaking oﬀ !

Be sure the pedals are opposite each

other! If the left pedal is all the way

up, the right pedal should be all the

way down!

Attach the seat to the main frame

using the quick adjustment knob. The

seat has 5 height adjustment holes, in

1" increments.

See FIG. 6 to the right.

NOTE: It is easiest to set seat height,

handlebar location and foot strap

tightness BEFORE placing the bike in

the water. Before riding, always check

that the seat post is securely clamped.

Riding with an improperly tightened

seat post can allow the saddle to slip

and/or fall.

Tidalwave Assembly Instructions

MAIN FRAME

RIGHT PEDAL

ASSEMBLY

FIGURE 5

MAIN FRAME

LEFT PEDAL

ASSEMBLY

5/16" X 3/4"

HEX HEAD (2)

5/16" LOCK

WASHER (2)

5/16" FLAT

WASHER (2)

ADJUSTABLE

SEAT

QUICK

ADJUSTMENT

KNOB

FIGURE 6

Revised 10/30/19