Aqua Creek Products F-004PLB-XR Manuale - Pagina 11

Sfoglia online o scarica il pdf Manuale per Sistemi di sollevamento Aqua Creek Products F-004PLB-XR. Aqua Creek Products F-004PLB-XR 20.

PROCEDURE
Wash down lift with fresh water and dry with clean, soft,
non-abrasive cloth
Recharge battery
Run the lift through a complete test cycle to verify it is
functioning properly
Visually inspect lift for damage, corrosion, and loose or
missing hardware
Check all contact points for damage and/or corrosion
Repair, clean, and apply dielectric grease to all contact
points
Thoroughly clean lift frame and apply a liberal coat of car
wax to maintain the lift's nish
Check all Warning and Cautionary labels to make sure they
are not faded or worn. Replace as needed.
PROPER CARE NOTES
STAIN REMOVAL TIPS:
To remove stains wash a ected area with mild dish soap. For stubborn spots and stains
try using soft scrub with some brisk rubbing. Use white epoxy paint to touch up. Apply
wax to nish.
For service and/or replacement parts contact Aqua Creek Direct at
Copyright © 2014 Aqua Creek Products All Rights Reserved
Proper Care of Pool & Spa Lifts
Toll free: (888) 687-3552
DAILY
WEEKLY
Revised 11/20/14
MONTHLY
11
V.1.1