Aqua Creek Products F-004PLB-XR Podręcznik - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik dla Systemy podnoszenia Aqua Creek Products F-004PLB-XR. Aqua Creek Products F-004PLB-XR 20 stron.

PROCEDURE

Wash down lift with fresh water and dry with clean, soft,

non-abrasive cloth

Recharge battery

Run the lift through a complete test cycle to verify it is

functioning properly

Visually inspect lift for damage, corrosion, and loose or

missing hardware

Check all contact points for damage and/or corrosion

Repair, clean, and apply dielectric grease to all contact

points

Thoroughly clean lift frame and apply a liberal coat of car

wax to maintain the lift's nish

Check all Warning and Cautionary labels to make sure they

are not faded or worn. Replace as needed.

PROPER CARE NOTES

STAIN REMOVAL TIPS:

To remove stains wash a ected area with mild dish soap. For stubborn spots and stains

try using soft scrub with some brisk rubbing. Use white epoxy paint to touch up. Apply

wax to nish.

For service and/or replacement parts contact Aqua Creek Direct at

Proper Care of Pool & Spa Lifts

Toll free: (888) 687-3552

DAILY

WEEKLY

Revised 11/20/14

MONTHLY

V.1.1