Aqua Creek Products Mighty Voyager Manuale di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per Sistemi di sollevamento Aqua Creek Products Mighty Voyager. Aqua Creek Products Mighty Voyager 14. Portable lift

Stampa la pagina

Mighty Voyager Fixing Kit Installation Instructions

• Core-drilling rig

• 1-1/4" diameter core-drill

• 3/4" wrench or socket

NOTE: Fixing Kit installation is only required for ADA applications.

Determine the location of the anchor insert, allowing for the ADA compliant clear

deck space. (see FIGURE 1, page 4)

Mark the location for the 1-1/4 inch x 4 inch deep anchor hole. Using a core-drill,

drill a 1-1/4 inch diameter, 4 inch deep hole at the marked location.

Dry-fi t the anchor insert to make sure it fi ts fl ush with the deck surface.

Fill the hole 1/2 full with epoxy (or equivalent). Install the anchor insert fl ush with

the deck surface and clean oﬀ any excess. Allow 24 hours for the epoxy to cure.

Roll the portable cart over the installed anchor. Align the anchor with the U-bracket.

Drop the fi xing bolt into the U-bracket and, by hand, start to thread into the anchor

insert. If needed, adjust the alignment of the lift.

When properly aligned, complete threading with a 3/4 inch wrench or socket.

Tighten until the bolt just touches the fl at washer. DO NOT OVERTIGHTEN.

U-BRACKET

TOOLS REQUIRED:

• 2-part construction epoxy or equivelent

• Tape measure

• Marking pen

1/2" X 2 1/2" HEX BOLT

1/2" FLAT WASHER

PVC ANCHOR INSERT

Revised 10/21/20