A.H.Beard INVIGORATE Manuale di montaggio e funzionamento - Pagina 7
Sfoglia online o scarica il pdf Manuale di montaggio e funzionamento per Arredamento per interni A.H.Beard INVIGORATE. A.H.Beard INVIGORATE 16. Adjustable base assembly and operation manual
Stampa la paginaASSEMBLY GUIDE
TWO PEOPLE ARE REQUIRED TO SET UP YOUR ADJUSTABLE BASE
STEP 1
Take the carton near to where you'd like the base to be set up. Place the carton flat on the floor with
the printed lid facing up.
When you open the carton, you will see that there are small boxes packed in with the base. These have
various parts in them. Move these boxes to a safe place and then lift the base out with the underside
of the base still facing upwards. Place in the desired location. Remove and dispose of any packing
materials.
STEP 2
Take out the four base legs. Each leg is made up of two pieces that allow for two height options. You
can use the 5" piece on its own or with the 3" extension to make the total leg height 8" .
Once the height is decided, place one large black washer over the leg thread and securely tighten the
leg onto your adjustable base. Repeat with the remaining three legs and black washers. Ensure there is
no gap between the leg and base.
STEP 3
Insert three (3) AAA batteries into the
compartment of the remote control.
7