A.H.Beard INVIGORATE Assembly And Operation Manual - Page 7

Browse online or download pdf Assembly And Operation Manual for Indoor Furnishing A.H.Beard INVIGORATE. A.H.Beard INVIGORATE 16 pages. Adjustable base assembly and operation manual

Print Page

1. Assembly Guide

ASSEMBLY GUIDE

TWO PEOPLE ARE REQUIRED TO SET UP YOUR ADJUSTABLE BASE

STEP 1

Take the carton near to where you'd like the base to be set up. Place the carton flat on the floor with

the printed lid facing up.

When you open the carton, you will see that there are small boxes packed in with the base. These have

various parts in them. Move these boxes to a safe place and then lift the base out with the underside

of the base still facing upwards. Place in the desired location. Remove and dispose of any packing

materials.

STEP 2

Take out the four base legs. Each leg is made up of two pieces that allow for two height options. You

can use the 5" piece on its own or with the 3" extension to make the total leg height 8" .

Once the height is decided, place one large black washer over the leg thread and securely tighten the

leg onto your adjustable base. Repeat with the remaining three legs and black washers. Ensure there is

no gap between the leg and base.

STEP 3

Insert three (3) AAA batteries into the

compartment of the remote control.