Aqua Lights AL250MH Manuale di istruzioni per l'installazione e la manutenzione - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione e la manutenzione per Apparecchio di illuminazione Aqua Lights AL250MH. Aqua Lights AL250MH 14. Underwater hull light
Stampa la pagina3. Apply epoxy to dry:
• Clean core material, leaving no visible core.
• Fill it to an even level amount.
• Sand clean and inspect for bubbles or pin holes.
4. There is an O-ring supplied with the
light to be used when installing on
smooth level surfaces of fiberglass or
metal.
• If the surface is irregular, disregard the O-ring.
• The surface should be clean of debris and moisture at this time, and
you should use the 180-grit sand paper to rough the adhesion points.
• Apply a generous amount of 3M 5200 Marine Adhesive Sealant.
• A 1/2-inch bead completely around the flange and some on the
shaft of the light will be sufficient.