DFE SW6 Manuale di istruzioni per l'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Controllore DFE SW6. DFE SW6 20. Digital tension controller

USER INTERFACE OVERVIEW

1.1 MAIN INTERFACE DESCRIPTION

The Steady Web 6 accepts all instructions and displays all information via a 5" touchscreen display (Fig.

1). All controller functions are context driven, and operate with color-coded buttons on the display. There

are no mechanical knobs, switches or buttons to operate.

For ease of use, the locations of the critical-use buttons/critical-awareness indicators have been made

uniform from one screen to the next. Those uniformly located buttons / indicators (Fig. 2) include the

following:

1. Tension On/Off, Auto/Man (Manual), and Display toggle buttons (all colored blue and at the bottom of

the screen). The only time the On/Off toggle button displays as anything other than On/Off is when the

controller is placed in E-STOP by an external input. When in E-STOP, the On/Off button displays as E-

STOP, and may only be restored by clearing the E-STOP signal, external to the controller. There are no

functions within the controller which will permit over-riding an external E-Stop signal.

2. Line Speed, Taper, Ratio, Soft Start and Hold (Sample & Hold) mode status indicators on the

information line above the toggle buttons, when active.

3. TLS indicator and Roll Diameter indicator, left and right of the tension display, above the information

line, when applicable.

4. Tension On/Off Status (upper LH corner) and Man/Auto Status (upper RH corner)

Figure 1 – STEADYWEB

™

6 USER INTERFACE