Aqua Medic CO2 complet Manuale operativo - Pagina 3

Sfoglia online o scarica il pdf Manuale operativo per Prodotto per la cura degli animali domestici Aqua Medic CO2 complet. Aqua Medic CO2 complet 8.

Stampa la pagina
2. CO
- pressure regulator regular
2
The pressure regulator
freshwater aquariums. To ensure maximum service life, dependable performance and trouble free
operation, read and follow all instructions.
Technical characteristics:
•
Type:
regular
•
code no:
71011
•
flow rate: 70 - 1200 ml/min
•
max pressure: 250 bar
•
gas: CO
only, working pressure 70 bar
2
•
material: brass, chrome plated
•
working pressure 1.5 bar
( at 70 bar primary pressure), fix adjusted.
•
pressure gauges: 2 pieces, for working pressure
and primary pressure
•
needle valve for adjustion of the CO
.
fig 1 regular
1 working pressure gauge
2. storage pressure gauge
3. needle valve
4. CO
hose connection
2
5. securing nut
6. O-ring
7 .connector to bottle 0-ring
The pressure in CO
bottles is much too high to be handled safely without a proper pressure
2
regulation. Solenoid valves, used for aquariums are safe for a pressure up to a maximum of 10
bars, standard tubing may be used up to 1 bar, special CO
CO
bottle varies, depending on the room temperature between 60 and 70 bar. In order to reduce
2
this pressure down to the optimum working pressure of the aqualine CO
regulator is needed. The CO
rugged instrument, engineered to withstand regular use while providing
regulation. The pressure regulator regular is a complete top class instrument. The whole unit is
chrome plated, to improve the corrosion resistance.
The unit is fitted with 2 chrome plated pressure gauges. The primary pressure gauge shows the
CO
pressure inside of the bottle. This pressure is 60 - 70 bar, as long as there is liquid CO
2
the bottle. The second pressure gauge shows the fix adjusted working pressure of 1,5 bar (
between 1 and 2 bar).
Installation
1. Fix the connection nut of the regulator on the thread of the CO
2. Adjust the pressure regulator ( fig2) and secure the connection nut with a spanner (size 23)
3. Connect the CO
- tube to the coresponding fitting(4). Remove the nut, and put it on the hose.
2
The hose is then fixed on the fitting with the nut.
regular has been especially designed for use with either marine or
3
flow rate
2
pressure regulator regular is best suited for this purpose. It is a
2
1
7
6
4
5
tubes up to 6 bars. The pressure in a
2
system, a pressure
2
sufficiently delicate
bottle (hand tight)
2
8
2
left in
2
3