Aqua Medic CO2 complet Manuale operativo - Pagina 4
Sfoglia online o scarica il pdf Manuale operativo per Prodotto per la cura degli animali domestici Aqua Medic CO2 complet. Aqua Medic CO2 complet 8.
Stampa la paginaAdjustion
1. Open the needle valve (3) slightly
2. Open the valve at the CO
70 bars, the working pressure gauge 1.5 bar ( 1-2 bar).
3. Open the needle valve, until the desired number of bubbles is reached.
Bubble counter: The exact control of the flow rate is checked with the bubble counter.
Safety tips
- Never separate a stationary pressure regulator form a CO
the bottle valve, and open the needle valve to release the gas befor you separate both units.
Keep all CO
pressure bottles away from heat.
2
3. CO
reactor 500
2
Use this reactor to replace CO
underwater operation only. Read and follow all instructions in this leaflet carefully for best results.
fig 2: reactor
1. CO
- reactor
2
2. flow adjustion valve
3. rubber sucker
4. lid with inner pipe
5. bottom lid
6. spiral tube
7. closing cap
8. water connection
9. CO
connection
2
10. spare port
11. adjudtion valve
technical characteristics
unit
art no:
CO
- connection port:
2
CO
input tube connection
2
water flow
holding system
The unit is designed for aquariums up to 500 l ( 120 gal) and
10°KH (4 mmol alcalinity). It can be increased with up to 4
enlargements. Each enlagrement will increase the capacity for
300 l (80 gal).
4
bottle (four full turns). The primary pressure gauge shows now 60 -
2
loss in freshwater or saltwater. This reactor has been designed for
2
CO
2
71111
9 mm
6 /4 mm, (1/4")
min 500l/h ( 125 gph),
max 1000 l/h (250 gph)
rubber sucker
bottle, if it is under pressure. Close
2