AvonSynth AVS-LFO-2 Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di registrazione AvonSynth AVS-LFO-2. AvonSynth AVS-LFO-2 3. Voltage controlled lfo

The

User Guide

Thank you for purchasing from AvonSynth

Congratulations on your purchase of a brand new AvonSynth AVS-LFO-2

VC-LFO Eurorack Module. We trust that it will both serve and inspire you

as you create beautiful music with it for years to come.

In order to get the most out of your module, please ensure that you read

this User Guide in its entirety so that you fully understand all of its

functionality, and that you follow all necessary safety directions during use.

Included in the Box

1 x VC-LFO Module

Installation

Step 1: Power your system oﬀ. Place the module in your Eurorack-

compatible rack in any convenient position. Aﬃx the module to your rails

using the included mounting screws and nylon washers. Neglecting to use

these washers may result in unnecessary marking of the unit.

Step 2: Triple check the polarity of the power connector before connecting

the power cord to your power supply. Ensure that the -12v line marked on

the back of the module connects to the same end of the ﬂat-cable that also

connects to the -12v line on your power supply. While AvonSynth

modules use shrouded connectors that make this process safer and more

reliable, some systems do not conform to this polarity standard, so careful

checking is always necessary. Connecting the module with incorrect

polarity can result in irreversable damage done to the module which

cannot be covered by warranty.

Step 3: Power up your system and start patching!

www.AvonSynth.com

1 x 10 pin to 16 pin

ﬂat-cable power cord

AVS-LFO-2

Voltage Controlled

LFO

4 x M3 Mounting Screws

4 x Nylon Washers

Page 1 of 3