AvonSynth AVS-LFO-2 Manual do utilizador
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de gravação AvonSynth AVS-LFO-2. AvonSynth AVS-LFO-2 3 páginas. Voltage controlled lfo
Imprimir página
The
User Guide
Thank you for purchasing from AvonSynth
Congratulations on your purchase of a brand new AvonSynth AVS-LFO-2
VC-LFO Eurorack Module. We trust that it will both serve and inspire you
as you create beautiful music with it for years to come.
In order to get the most out of your module, please ensure that you read
this User Guide in its entirety so that you fully understand all of its
functionality, and that you follow all necessary safety directions during use.
Included in the Box
1 x VC-LFO Module
Installation
Step 1: Power your system off. Place the module in your Eurorack-
compatible rack in any convenient position. Affix the module to your rails
using the included mounting screws and nylon washers. Neglecting to use
these washers may result in unnecessary marking of the unit.
Step 2: Triple check the polarity of the power connector before connecting
the power cord to your power supply. Ensure that the -12v line marked on
the back of the module connects to the same end of the flat-cable that also
connects to the -12v line on your power supply. While AvonSynth
modules use shrouded connectors that make this process safer and more
reliable, some systems do not conform to this polarity standard, so careful
checking is always necessary. Connecting the module with incorrect
polarity can result in irreversable damage done to the module which
cannot be covered by warranty.
Step 3: Power up your system and start patching!
www.AvonSynth.com
1 x 10 pin to 16 pin
flat-cable power cord
AVS-LFO-2
Voltage Controlled
LFO
4 x M3 Mounting Screws
4 x Nylon Washers
Page 1 of 3