Avtech AVT543 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Telecamera di sicurezza Avtech AVT543. Avtech AVT543 8.

INSTALLATION

Step 1: Find the installation sticker on the sales package, and paste it to where you want to install this camera.

Then, drill screw holes as indicated on the sticker.

Step 2: Arrange the cables to be connected as shown in

installation later.

NOTE: A waterproof kit for a coaxial cable could be used to protect the connectors from moisture /

water. Please check "WATERPROOF KIT FOR COAXIAL CABLE" to know how to use it.

Figure 1

Step 3: Remove the camera cover by using the wretch supplied within the sales package, and find the three

screw holes on the camera base.

Step 4: Connect the cables. Then, align the screw holes on the camera base with the holes drilled in Step1,

and install the camera.

NOTE: Three rubber rings are provided within the sales package. They should be used with the

screws during installation for waterproof purposes.

Figure 3

Figure 4

depending on the installation location for

Figure 2