Dell Inspiron 1210 Manuale di servizio - Pagina 14

Sfoglia online o scarica il pdf Manuale di servizio per Computer portatile Dell Inspiron 1210. Dell Inspiron 1210 39. Service manual
Anche per Dell Inspiron 1210: Manuale di avvio rapido (19 pagine)

Stampa la pagina

Back to Contents Page

Replacing the Display

Dell™ Inspiron™ 1210 Service Manual

Replacing the Display Assembly

Replacing the Display Bezel

Replacing the Display Panel

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE:

To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the

computer.

Replacing the Display Assembly

1. Follow the instructions in "Before You Begin" on page 9.

2. Remove the palm rest. See

NOTE:

Note how the display cable and the 2-in-1 camera and LVDS cable have been connected on the system board.

display

2-in-1 cable: camera end

3. Pull the display cable tab to disconnect the display cable from the system board connector.

4. Disconnect the 2-in-1 camera and LVDS cable from the system board connector.

5. Remove the four M2.5 x 3-mm screws from the display hinges.

6. Lift and remove the display assembly from the computer base.

Replacing the Palm

Rest.

M2.5 x 3-mm screws (4)

2-in-1 cable: LVDS end