Dell Inspiron 1210 서비스 매뉴얼 - 페이지 14

{카테고리_이름} Dell Inspiron 1210에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 1210 39 페이지. Service manual
Dell Inspiron 1210에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (19 페이지)

페이지 인쇄

Back to Contents Page

Replacing the Display

Dell™ Inspiron™ 1210 Service Manual

Replacing the Display Assembly

Replacing the Display Bezel

Replacing the Display Panel

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE:

To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the

computer.

Replacing the Display Assembly

1. Follow the instructions in "Before You Begin" on page 9.

2. Remove the palm rest. See

NOTE:

Note how the display cable and the 2-in-1 camera and LVDS cable have been connected on the system board.

display

2-in-1 cable: camera end

3. Pull the display cable tab to disconnect the display cable from the system board connector.

4. Disconnect the 2-in-1 camera and LVDS cable from the system board connector.

5. Remove the four M2.5 x 3-mm screws from the display hinges.

6. Lift and remove the display assembly from the computer base.

Replacing the Palm

Rest.

M2.5 x 3-mm screws (4)

2-in-1 cable: LVDS end