Dell Inspiron 535 Manuale di servizio - Pagina 19

Sfoglia online o scarica il pdf Manuale di servizio per Desktop Dell Inspiron 535. Dell Inspiron 535 46. Service manual

NOTE:

The location and number of SATA connectors may vary based on your computer model. For more information, see

Components.

1 power cable

2 data cable

4 custom screws (2) 5 SATA connector (on the system board)

5. Remove the two screws securing the optical drive.

6. Slide the optical drive out through the front of the computer.

7. Replace the bezel (see

Replacing the Front

8. Replace the computer cover (see

9. Connect your computer and devices to electrical outlets, and then turn them on.

10. Configure the drives in system setup (see

Replacing an Optical Drive

1. Follow the procedures in

Before You

2. Remove the computer cover (see

3. Remove the bezel (see

Removing the Front

4. Gently slide the optical drive into place.

5. Align the screw holes in the optical drive with the screw holes in the optical drive bay.

6. Replace the two screws that secure the optical drive to the optical drive bay.

7. Connect the power and data cables to the optical drive.

8. Replace the bezel (see

Replacing the Front

9. Replace the computer cover (see

10. Connect your computer and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

11. Check the System Setup for drive configuration changes (see

Back to Contents Page

3 optical drive

Bezel).

Replacing the Computer

Cover).

System Setup

Options).

Begin.

Removing the Computer

Cover).

Bezel).

Replacing the Computer

Cover).

Entering System

Setup).

System Board