Dell PowerEdge 2300 Manuale di aggiornamento - Pagina 18
Sfoglia online o scarica il pdf Manuale di aggiornamento per Server Dell PowerEdge 2300. Dell PowerEdge 2300 23. Vga card installation instructions
Anche per Dell PowerEdge 2300: Manuale di configurazione (2 pagine), Avvio rapido e connessioni (5 pagine), Istruzioni per l'installazione del rack (26 pagine), Manuale di aggiornamento (24 pagine), Istruzioni per l'installazione (1 pagine)
![Dell PowerEdge 2300 Manuale di aggiornamento](/uploads/products/server2/3187299/3187299.png)
support.dell.com
!" #
!
&
'
The plastic cooling shroud inside the system is used to improve airflow over the
microprocessors. You may need to remove this shroud to access certain components
on the system board.
"
#
To remove the cooling shroud, perform the following steps.
1.
Turn off the system, including any attached peripherals, and disconnect the
power cable from the electrical outlet.
2.
Remove the right-side computer cover.
3.
Unscrew and remove the two retention pins (see Figure 1-7).
4.
Remove the shroud by lifting the end of the shroud closest to the microproces-
sor(s) until the opposite end of the shroud disengages from the cooling fan on
the system back panel.
Dell PowerEdge Systems — Microprocessor Upgrade
1-15