Dell PowerEdge 2300 Руководство по обновлению - Страница 18

Просмотреть онлайн или скачать pdf Руководство по обновлению для Сервер Dell PowerEdge 2300. Dell PowerEdge 2300 23 страницы. Vga card installation instructions
Также для Dell PowerEdge 2300: Руководство по настройке (2 страниц), Быстрый старт и подключения (5 страниц), Инструкции по установке стоек (26 страниц), Руководство по обновлению (24 страниц), Инструкции по установке (1 страниц)

support.dell.com

!" # ! &

The plastic cooling shroud inside the system is used to improve airflow over the

microprocessors. You may need to remove this shroud to access certain components

on the system board.

" #

To remove the cooling shroud, perform the following steps.

Turn off the system, including any attached peripherals, and disconnect the

power cable from the electrical outlet.

Remove the right-side computer cover.

Unscrew and remove the two retention pins (see Figure 1-7).

Remove the shroud by lifting the end of the shroud closest to the microproces-

sor(s) until the opposite end of the shroud disengages from the cooling fan on

the system back panel.

Dell PowerEdge Systems — Microprocessor Upgrade

1-15