Dell PowerEdge 6800 Manuale di risoluzione dei problemi - Pagina 7

Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Server Dell PowerEdge 6800. Dell PowerEdge 6800 16. Installation and troubleshooting guide (.htm)

Stampa la pagina

Important Safety Information

Observe the safety precautions in the following subsections when installing your system in the rack.

CAUTION:

You must strictly follow the procedures in this document to protect yourself as well as

others who may be involved. Your system may be very large and heavy, and proper preparation and

planning are important to prevent injury to yourself and to others. This becomes increasingly important

when systems are installed high up in the rack.

Rack Stabilizer Feet

CAUTION:

Before installing systems in a rack, install front and side stabilizers on stand-alone (single)

racks or the front stabilizer on racks joined to other racks. Failure to install stabilizers accordingly before

installing systems in a rack could cause the rack to tip over, potentially resulting in bodily injury under

certain circumstances. Therefore, always install the stabilizer(s) before installing components in the rack.

CAUTION:

After installing systems in a rack, never pull more than one system out of the rack on its

slide assemblies at one time. The weight of more than one extended system could cause the rack to tip

over and cause injury.

The stabilizer feet help prevent the rack from tipping over when a system or other component is

pulled out of the rack with the slide assemblies fully extended. See the documentation provided

with the rack cabinet for instructions on installing and anchoring the stabilizer feet.

Installing the Tower-to-Rack Kit

CAUTION:

The system may weigh up to 49 kilograms (108 pounds) when fully loaded. To prevent

personal injury, do not attempt to move the system by yourself.

Tower-to-Rack Conversion Guide