Dell VEP4600 Manuale di configurazione - Pagina 18
Sfoglia online o scarica il pdf Manuale di configurazione per Server Dell VEP4600. Dell VEP4600 23.
Anche per Dell VEP4600: Manuale di installazione (40 pagine), Manuale di installazione (40 pagine)
Stampa la pagina
Figure 8. Platform four-post rear installed
About three inches before you fully insert your platform, the rail locking feature engages
to keep the platform from inadvertently sliding out and falling.
To remove the platform, unscrew the rack-mounting screws and slide the platform forward.
Optics installation
WARNING:
When working with optical fibers, follow all warning labels and always
wear eye protection. Never look directly into the end of a terminated or
unterminated fiber or connector as it may cause eye damage.
1
Position the optic so it is in the correct position.
The optic has a key that prevents it from being inserted incorrectly.
2
Insert the optic into the port until it gently snaps into place.
NOTE:
When you cable the ports, be sure not to interfere with the airflow from
the small vent holes above and below the ports.
Optics removal
Remove an optic by pushing the tab on the optic and sliding the optic from the port.
When removing optics with direct attach cables (DACs) from the port, pull the release tab
firmly and steadily. Before pulling the release tab, you may need to gently push the optic into
the port to ensure that it is seated properly. Do not jerk or tug repeatedly on the tab.
18
VEP4600 installation