Dell VEP4600 설정 매뉴얼 - 페이지 18

{카테고리_이름} Dell VEP4600에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell VEP4600 23 페이지.
Dell VEP4600에 대해서도 마찬가지입니다: 설치 매뉴얼 (40 페이지), 설치 매뉴얼 (40 페이지)

Figure 8. Platform four-post rear installed

About three inches before you fully insert your platform, the rail locking feature engages

to keep the platform from inadvertently sliding out and falling.

To remove the platform, unscrew the rack-mounting screws and slide the platform forward.

Optics installation

WARNING:

When working with optical fibers, follow all warning labels and always

wear eye protection. Never look directly into the end of a terminated or

unterminated fiber or connector as it may cause eye damage.

Position the optic so it is in the correct position.

The optic has a key that prevents it from being inserted incorrectly.

Insert the optic into the port until it gently snaps into place.

NOTE:

When you cable the ports, be sure not to interfere with the airflow from

the small vent holes above and below the ports.

Remove an optic by pushing the tab on the optic and sliding the optic from the port.

When removing optics with direct attach cables (DACs) from the port, pull the release tab

firmly and steadily. Before pulling the release tab, you may need to gently push the optic into

the port to ensure that it is seated properly. Do not jerk or tug repeatedly on the tab.

VEP4600 installation