Dell PowerEdge 4400 Manuale di installazione - Pagina 19

Sfoglia online o scarica il pdf Manuale di installazione per Immagazzinamento Dell PowerEdge 4400. Dell PowerEdge 4400 28. Wake-on-lan (wol) support on dell servers
Anche per Dell PowerEdge 4400: Manuale di installazione (42 pagine), Manuale di installazione (20 pagine), Installazione del rack (37 pagine), Manuale di aggiornamento (8 pagine), Aggiornamento delle informazioni (8 pagine), Manuale d'uso (42 pagine), Installazione del rack (34 pagine), Manuale di installazione dell'hardware (40 pagine), Manuale di installazione (36 pagine), Manuale (15 pagine)

Stampa la pagina
Dell PowerEdge 4400 Manuale di installazione
support.dell.com
To replace the 24-U rack's front and back doors, perform the following steps:
1.
Lift the front door into position, and align the hinges with the hinge insert in the
rack as shown in Figure 1-4.
2.
Slide the hinge pins into the hinge insert in the rack until the hinges lock into
position.
3.
Repeat steps 1 and 2 to install the back door.

Installing the Rubber Feet

To install the rubber feet on the system base, perform these steps:
1.
Lay the system on its left side (see Figure 1-11) on a piece of foam or cardboard
(to prevent damage to the system).
2.
Attach a rubber foot in each of the four corners on the cabinet base (the cabinet's
right side in the former rack configuration) using an 8-32 x 0.5-inch hex-head,
thread-forming screw (screws and rubber feet at provided with the kit), as shown
in Figure 1-11.

Figure 1-11. Installing the Rubber Feet

Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
8-32 x 0.5-inch screw
rubber feet (4)
1-13