Dell PowerVault MD3060e Series Manuale introduttivo - Pagina 3

Sfoglia online o scarica il pdf Manuale introduttivo per Immagazzinamento Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 10. Storage enclosure
Anche per Dell PowerVault MD3060e Series: Manuale hardware e software (25 pagine), Manuale di installazione (11 pagine), Aggiornamento delle informazioni (8 pagine), Istruzioni per l'installazione del rack (2 pagine), Impostazione (2 pagine), Manuale d'uso (24 pagine), Manuale dell'amministratore (35 pagine), Manuale introduttivo (10 pagine), Manuale d'uso (24 pagine), Manuale d'uso (40 pagine), Manuale dell'amministratore (48 pagine), Impostazione (2 pagine)

Installation and Configuration

WARNING: Before performing the following procedure, review the safety instructions that came with the system.

WARNING: The weight of your system without the physical disks installed (empty weight) is 19.50 kg (43.0 lb) and

when fully populated with all the physical disks is 105.20 kg (232.0 lb).

WARNING: Your system must be installed by Dell certified service technicians. For safe installation of an empty

system, a minimum of three service technicians are required. To install a fully populated system, a mechanized

lifting tool is required to position the system in a rack.

WARNING: Install the physical disks into the system only after installing the system in the rack. Installing the

system in the rack with the physical disks installed can damage the disks or cause injury.

CAUTION: Before installing your system in the rack, ensure that the weight of the system does not exceed the

rack's weight limit. For more information, see the Rack Installation Instructions that shipped with your system.

NOTE: For weight stability, always load the rack from the bottom up.

Figure 1. Installing the System in a Rack

Unpack your system and identify each item.

Assemble the rails and install the system in the rack following the safety instructions and the rack installation

instructions provided with your system.