Dell PowerVault TL4000 Come iniziare - Pagina 20

Sfoglia online o scarica il pdf Come iniziare per Immagazzinamento Dell PowerVault TL4000. Dell PowerVault TL4000 38. Tape library
Anche per Dell PowerVault TL4000: Note di rilascio (3 pagine), Faq (26 pagine), Manuale di avvio rapido (7 pagine), Manuale del software (16 pagine), Manuale di configurazione (22 pagine), Informazioni importanti Manuale (10 pagine), Addendum al manuale d'uso (2 pagine), Manuale introduttivo (3 pagine), Istruzioni per l'allegato (17 pagine), Opuscolo (4 pagine), Manuale d'uso (20 pagine)

Figure 1-12. Securing the 4U library to the rack

Connecting the Host Interface Cable

To connect the host interface cables to the library:

1. It is recommended that you shut down and turn OFF the associated server.

2. For a SCSI library, attach one end of the host interface cable to one of the

1-10

Getting Started with the Dell PowerVault TL2000 and TL4000 Tape Libraries

Turn OFF all attached devices. Remove the power cables from the server and

all attached accessories.

Important: Failure to remove the power cords from these devices before

connecting the host interface cable could result in damage to the

library.

connectors on the back panel of the library (see 1 in Figure 1-13 on page

1-11). For a Fibre Channel library, attach one end of the host interface cable to

the connector on the back panel of the library (see 5 in Figure 1-14 on page

1-11). For a Serial Attached SCSI (SAS) connected library, attach the host end of

the SAS cable to the SAS or Mini-SAS (SFF-8088) HBA (see 2 in Figure 1-15

on page 1-11). Full high drives will have dual SAS or Mini-SAS connectors.

Half high drives will have one SAS connector. Unused SAS connectors do not

need to be terminated.