Dell PowerVault TL4000 Começar a trabalhar - Página 20

Procurar online ou descarregar pdf Começar a trabalhar para Armazenamento Dell PowerVault TL4000. Dell PowerVault TL4000 38 páginas. Tape library
Também para Dell PowerVault TL4000: Notas de lançamento (3 páginas), Perguntas frequentes (26 páginas), Manual de início rápido (7 páginas), Manual do software (16 páginas), Manual de configuração (22 páginas), Manual de informações importantes (10 páginas), Adenda ao Manual do Utilizador (2 páginas), Manual de iniciação (3 páginas), Instruções de anexação (17 páginas), Brochura (4 páginas), Manual do utilizador (20 páginas)

Figure 1-12. Securing the 4U library to the rack

Connecting the Host Interface Cable

To connect the host interface cables to the library:

1. It is recommended that you shut down and turn OFF the associated server.

2. For a SCSI library, attach one end of the host interface cable to one of the

1-10

Getting Started with the Dell PowerVault TL2000 and TL4000 Tape Libraries

Turn OFF all attached devices. Remove the power cables from the server and

all attached accessories.

Important: Failure to remove the power cords from these devices before

connecting the host interface cable could result in damage to the

library.

connectors on the back panel of the library (see 1 in Figure 1-13 on page

1-11). For a Fibre Channel library, attach one end of the host interface cable to

the connector on the back panel of the library (see 5 in Figure 1-14 on page

1-11). For a Serial Attached SCSI (SAS) connected library, attach the host end of

the SAS cable to the SAS or Mini-SAS (SFF-8088) HBA (see 2 in Figure 1-15

on page 1-11). Full high drives will have dual SAS or Mini-SAS connectors.

Half high drives will have one SAS connector. Unused SAS connectors do not

need to be terminated.