Dell Force10 MXL Blade Manuale introduttivo - Pagina 14
Sfoglia online o scarica il pdf Manuale introduttivo per Interruttore Dell Force10 MXL Blade. Dell Force10 MXL Blade 38. 10/40gbe blade switches
Anche per Dell Force10 MXL Blade: Nota applicativa (6 pagine), Specifiche tecniche (2 pagine), Manuale (27 pagine)
Stampa la pagina
Unpacking the Switch
Package Contents
When unpacking each switch, make sure that the following items are
included:
•
One Dell Force10 MXL 10/40GbE Switch IO Module
•
One USB type A-to-DB-9 female cable
•
Getting Started Guide
•
Safety and Regulatory Information
•
Warranty and Support Information
•
Software License Agreement
Unpacking Steps
NOTE:
Before unpacking the switch, inspect the container and immediately report any
evidence of damage.
1 Place the container on a clean, flat surface and cut all straps securing the
container.
2 Open the container or remove the container top.
3 Carefully remove the switch from the container and place it on a secure
and clean surface.
4 Remove all packing material.
5 Inspect the product and accessories for damage.
Installing and Configuring the
Switch
After you unpack the MXL 10/40GbE Switch, refer to the flow chart in
Figure 1-6 for an overview of the steps you must follow to install the blade
and perform the initial configuration.
You can check to see that a switch is running the latest FTOS version by entering
the show version command. To download an FTOS version, go to
14
Installing and Configuring the Switch
http://support.dell.com
.