- ページ 14

スイッチ Dell Force10 MXL BladeのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Dell Force10 MXL Blade 38 ページ。 10/40gbe blade switches
Dell Force10 MXL Blade にも：アプリケーションノート (6 ページ), 仕様 (2 ページ), マニュアル (27 ページ)

ページを印刷する

Unpacking the Switch

Package Contents

When unpacking each switch, make sure that the following items are

included:

•

One Dell Force10 MXL 10/40GbE Switch IO Module

•

One USB type A-to-DB-9 female cable

•

Getting Started Guide

•

Safety and Regulatory Information

•

Warranty and Support Information

•

Software License Agreement

Unpacking Steps

NOTE:

Before unpacking the switch, inspect the container and immediately report any

evidence of damage.

1 Place the container on a clean, flat surface and cut all straps securing the

container.

2 Open the container or remove the container top.

3 Carefully remove the switch from the container and place it on a secure

and clean surface.

4 Remove all packing material.

5 Inspect the product and accessories for damage.

Installing and Configuring the

Switch

After you unpack the MXL 10/40GbE Switch, refer to the flow chart in

Figure 1-6 for an overview of the steps you must follow to install the blade

and perform the initial configuration.

You can check to see that a switch is running the latest FTOS version by entering

the show version command. To download an FTOS version, go to

Installing and Configuring the Switch

http://support.dell.com