3 Day Blinds ROLLER SHADE Come iniziare - Pagina 2

Sfoglia online o scarica il pdf Come iniziare per Tende per finestre 3 Day Blinds ROLLER SHADE. 3 Day Blinds ROLLER SHADE 8. Continuous cord loop and link system with cassette, continuous cord loop with side channels

Stampa la pagina

INSIDE MOUNT

• Align the tops of each installation cassette to the top of the

window opening and attach using the screws provided,

drilling through the predrilled holes.

• Adjust the cassette placement to accommodate

obstructions to the bottom rail, such as a window crank or

handle.

• Use a carpenter's level to check that the cassette is level and

aligned. Attach using the screws provided and drill through

the predrilled holes.

OUTSIDE MOUNT

• Attach the back of each installation cassette using one

screw per predrilled hole.

• Use a carpenter's level to check that the cassette is level

and aligned.

| Cassettes and Side Channels

SHADE INSTALLATION

INTO CASSETTE

Once you have installed the Cassette now it is time to

reassemble the shade back into the Cassette. Insert the

control side fi rst making sure the mechanism is turned just

like it was when removed, chain guard turned up towards

Cassette so chain is visable(picture below). Next push the idle

pin in and slowly insert the shade into the groove provided

by the internal bracket until the pin snaps into place. Then

reattach the CCL guide to the end plate making sure the

complete piece snaps into place in the correct groves.

Once you have the shade back into the Cassette now it is

time to reattach the Fascia. The Fascia sits in a grove on

top of the Cassette and snaps into the end plates on the

right and left side. Insert the Round or Square fascia onto

the Cassette back grove & rotate down to clip into position

on the right and left side, you will hear it snap into place.

The fi nal step is to attach the end caps on the right and left

side of the Cassette.

• Align the square or round end caps and slide them

onto the end plates of the cassette. You will hear a

click when they are in place.

• Test the shade to ensure

it is operating correctly.