3 Day Blinds VINYL BLINDS Come iniziare - Pagina 6

Sfoglia online o scarica il pdf Come iniziare per Tende per finestre 3 Day Blinds VINYL BLINDS. 3 Day Blinds VINYL BLINDS 10.

Stampa la pagina

STANDARD VALANCE (SQUARE)

Dust Cover

| Vinyl Blinds

• Place the top edge of the

valance slat into the top

edge of the valance clips.

Push the valance upward

until the bottom edge of

the valance snaps into the

valance clips.

• Install the longest valance

slat on the upper portion

of the valance clips.

• Place the top edge of the

valance slat into the top

edge of the valance clips.

Push the valance upward

until the bottom edge of

the valance snaps into the

valance clips.

To Assemble the Valance:

• Insert vinyl inserts into the

valance returns.

• Attach valance returns to

the valance using the closed

valance corner.

STANDARD VALANCE (OUTSIDE MOUNT)

• To install, the valance must be pre-drilled. Using a pencil,

mark pilot holes 6" in from each end of the valance and

in from the back of the valance. If additional brackets were

sent with your valance mark additional pilot holes evenly

spaced over the remaining width of the valance. Drill holes

at the pencil marks using a

• Once extension brackets are installed, position the valance

over the window and roller shade.

NOTE: The valance should be positioned to cover the top of

the shade roll. Please leave enough room to allow the shade

to operate properly. Using the level and a pencil, mark the

bottom corners of each extension bracket.

" drill bit.

• Once the extension brackets

are installed , position the

valance over the window

and roller shade

• Remove the extension

brackets from the valance

and install them using the

screws provided.