Dell PowerEdge M420 Manuale - Pagina 16

Sfoglia online o scarica il pdf Manuale per Interruttore Dell PowerEdge M420. Dell PowerEdge M420 25. Dell poweredge blade servers getting started guide
Anche per Dell PowerEdge M420: Aggiornamento delle informazioni (38 pagine), Note di rilascio (27 pagine), Manuale d'uso (23 pagine), Informazioni importanti Manuale (35 pagine), Manuale di aggiornamento (32 pagine), Manuale di aggiornamento (28 pagine), Manuale d'uso (26 pagine), Manuale d'uso (22 pagine), Manuale introduttivo (12 pagine), Manuale (38 pagine), Manuale tecnico (46 pagine), Manuale tecnico (48 pagine), Manuale del portafoglio (27 pagine), Manuale introduttivo (14 pagine), Manuale introduttivo (12 pagine)

Rev 1.00

Description:

Use this command to restart the module components. When this command is issued, PTM compo-

nents go through a full hardware reset, followed by software reload.

Options:

• device_number: specify a single device to reset

Example:

$ reload

3.5

Software Update Commands

Synopsys:

show image ver

Description:

Display the current software image version.

ADMIN: This command also displays the firmware version of each component.

Example:

# login admin

& show image ver

Software image short version: V Z.ZZ

Software image version: X.X.XXX-<date stamp>

Component #1 firmware version: Y.Y.YYY

Component #2 firmware version: Y.Y.YYY

Component #3 firmware version: Y.Y.YYY

& login user

Synopsys:

copy image from-file [device_number]

Description:

Update the firmware the PTM software image. In ADMIN mode, it allows selective upgrade of a

single device in the PTM. Immediately after running this command, the CLI waits for the user to

send the firmware image using the ZModem protocol. To abort this operation, use CTRL-C. For

additional details on the firmware update procedure refer to

on page 22

ADMIN:

Section 4, "Operating Procedures,"

Software User's Manual