Dell PowerEdge M420 Manuale tecnico - Pagina 30

Sfoglia online o scarica il pdf Manuale tecnico per Interruttore Dell PowerEdge M420. Dell PowerEdge M420 48. Dell poweredge blade servers getting started guide
Anche per Dell PowerEdge M420: Aggiornamento delle informazioni (38 pagine), Note di rilascio (27 pagine), Manuale (25 pagine), Manuale d'uso (23 pagine), Informazioni importanti Manuale (35 pagine), Manuale di aggiornamento (32 pagine), Manuale di aggiornamento (28 pagine), Manuale d'uso (26 pagine), Manuale d'uso (22 pagine), Manuale introduttivo (12 pagine), Manuale (38 pagine), Manuale tecnico (46 pagine), Manuale del portafoglio (27 pagine), Manuale introduttivo (14 pagine), Manuale introduttivo (12 pagine)

Stampa la pagina

Thermal control also detects and responds to hardware configuration. Thermal management

adjusts cooling according to what the system really needs, and draws lower fan power draw and

generates lower acoustical noise levels than those without such controls.



Environmental specifications: The optimized thermal management makes the PowerEdge

M420 reliable under a wide range of operating environments as shown in Table 23. When

operating above 30°C ambient, performance impacts may be seen. For more information see

Dell PowerEdge M420 Systems Owner's Manual

the

Acoustical performance

The acoustical performance of the PowerEdge M420 is reflected in Table 15.

Four sleeves, each containing four typically

host chassis; all blades had the same configuration and same airflow impedance. Remaining blade

slots were filled with blanks of same impedance as blades. Acoustical measurements were made in

23 ± 2 °C ambient.

The M420 is built for high density and high performance. The great power density of the M420

means that small increases in utilization require large increases in fan speed, hence large increases

in loudness. This means that loudness with an M420 increases significantly with utilization; in fact,

more so than other Dell blade products.

Configuration

CPUs

(23 ± 2°C ambient)

Typical

2 x 95W

Typical configuration means 2x 95W CPUs, x 2GB DIMMs, 1x Mezzanine card and 1x uSATA SSD.

-UL is the upper limit sound power levels (L

accordance to ISO 7779 (2010).

is the average A-weighted sound pressure level from the four bystander positions calculated per section 4.3 of

ISO 9296 (1988) and measured in accordance with ISO 7779 (2010). The system is placed in a half rack enclosure (base

of system is 25 cm above reflective floor).

Operating is a mode per ISO 7779 (2010) definition 3.1.6. Blade stressing applications vary widely thus also do respective

operating acoustical values; the values are given above as a likely range, for example, "likely greater than or equal to,"

(≥). SPECPower™ at 50 percent utilization is the benchmark used for the lower bound here.

Idle: Reference ISO 7779 (2010) definition 3.1.7; system is running in its operating system but no other specific activity;

PowerEdge M420 Technical Guide

configured M420 blades, were installed in the M1000e

Table 15.

M420 acoustical performance

Drives

DIMMs

1 x uSATA

SSD

) calculated per section 4.4.1 of ISO 9296 (1988) and measured in

on Dell.com/Support/Manuals.

Operating

PCI cards

Operating

1 mezzanine

card

-UL

mode

(bels)

8.9

Idle

7.9

(dBA)