Entec EW-4200D Manuale di istruzioni per l'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Generatore portatile Entec EW-4200D. Entec EW-4200D 19. Marine diesel generators

Operation

MANUAL HAND STARTING

Manual hand starting is similar, but not identical to, Starting the

Engine for the First Time.

1. Follow steps 1 through 8 in Starting the Engine for the First

Time.

2. Put the Off/Run/Start switch in the Run position.

3. Place the Handcrank in the Camshaft. Position your body to

the front of the unit. Grasp the handcrank in your left hand

and gently rotate it counterclockwise for two or three turns.

This action will pre-lube the bearings.

3. Now crank energetically to build up inertia in the moving

parts of the engine. Each time the handcrank makes one

revolution, the compression release will automatically index

one step. On the seventh turn the Compression Release will

reset itself to normal compression mode. Do not slow down.

Your body energy added to the inertia will help you pull

through the compression stroke and create ignition. When this

happens, the engine will start.

All three lights on the control panel should be illuminated and

will remain so until the engine is stopped by the operator, or

the safety system detects a problem (26/0).

NOTE: Do not be afraid of the Handcrank. It will not back-

fire. It will automatically disengage itself from the Camshaft.

We suggest you try the manual start method for the first time

when the engine is warm from running.

16710 SW 72nd • Portland, Oregon 97224 • (503) 624-7118

EW-4200D

Handcrank on

Camshaft

Control Panel

Entec West, Inc.