Dell S6010-ON Note di rilascio del firmware - Pagina 5
Sfoglia online o scarica il pdf Note di rilascio del firmware per Interruttore Dell S6010-ON. Dell S6010-ON 12.
Anche per Dell S6010-ON: Manuale di installazione (46 pagine)
Stampa la pagina
BIOS
Downgrading BIOS is not supported. You can only upgrade to the latest BIOS version.
Marginal reset timing change
Changed the marginal reset timing for out-of-band (OOB) the management port.
BIOS version numbering change
The BIOS version nomenclature has changed. The version X.Y.Z.U-V:
X
The processor family. For example, 3 for X86 on an S6010-ON switch.
Y
The platform ID within the processor family. For example, the S6010-ON switch is 26.
Z
The image type. For example, BIOS = 0.
U
The bit definitions for the BIOS are:
V
The image version.
Additional BIOS information
● Updated Microcode for Spectre/Meltdown from version M01406D8125 to M01406D812A.
○ CVE-2018-3639, Spectre/Variant #4, and CVE-2018-3640, Spectre/Variant #3a, are addressed by applying the updated
processor microcode from Intel included in this release.
○ This BIOS revision includes the updated processor microcode that is a required part of the mitigation for CVE-2018-3639,
Spectre/Variant #4, and CVE-2018-3640, Spectre/Variant#3a.
● Changed the Intel Reference Code from version 1.0.0.43 to 1.0.0.48 to support higher-density DIMMs.
● Added the critical device feature for POST to detect if an OS-critical device is missing or misconfigured.
ONIE self-update
WARNING:
Do not power-cycle the board when an ONIE self-update is in progress. If the install or upgrade task
is interrupted, the board might have an invalid MBR/GPT/Grub, and would not boot into ONIE. In this case, use
a recovery procedure to bring up the switch so long as the BIOS is functional.
I2C bus
NOTE:
After a thermal shutdown, the I2C bus could lock up occasionally. If this action happens, you must manually power
cycle the switch.
Table 3. BIOS bit definitions
Bit
0
1
2
3
4
5
Feature
Partition
Baud rate
N/A
PXE
N/A
Bootloader
State
0=MBR, 1=UEFI
0=115200, 1=9600
N/A
0=not supported
N/A
0=AMI BIOS
5