360 BANDIT KINZE 3000 Manuale di istruzioni per l'installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Macchine agricole 360 BANDIT KINZE 3000. 360 BANDIT KINZE 3000 6.

INSTALLATION INSTRUCTIONS

KINZE 3000

BEFORE YOU BEGIN...

HELPFUL TOOLS

Hammer/Mallet

Wrench Sizes: 3/4", 9/16" and 15/16"

Socket Sizes: 3/4", 9/16" and 15/16"

Impact Driver/ Socket Wrench

STEP 1

REMOVE CLOSING WHEELS

Release spring 1 to remove tension from closing system.

Remove closing wheels with a 15/16" socket and wrench 2.

Retain the closing wheels, bolts, and nuts for re-installation

later in the instructions.

If present, remove insecticide attachment.

NOTES:

Removal of the closing wheels is necessary to facilitate the

ease of removing and reinstalling the spring.

If you are installing the optional chains kit, the bolts and

nuts 3 can be discarded but the bushings 4 need to be

kept.

PAGE 2

STEP 2

REMOVE CLOSING SYSTEM ARMS

Using a 9/16" socket, remove the bolt that holds the closing

wheel arm stop 5 to the row unit between the gauge

wheels.

NOTE: The gauge wheels may need to be held up to remove

the bolt.

Using a 3/4" socket remove the nut from the carriage bolt

that secures the closing system arms on the row unit.

Remove carriage bolt and remove closing system arms 6

from the row unit. Discard carriage bolt, nut and washers.

Retain two piece bushing 7.

Remove spring from closing wheel arm stop and set closing

wheel arm stop to the side.

NOTE: Retain closing wheel arm stop in a safe location for

installation of closing system without 360 BANDIT.