360 Vision Visiondome-VR Manuale di installazione e configurazione - Pagina 13
Sfoglia online o scarica il pdf Manuale di installazione e configurazione per Telecamera di sicurezza 360 Vision Visiondome-VR. 360 Vision Visiondome-VR 16.
Stampa la pagina
Visiondome VR Installation Manual Ver 2.7
Settings Menu
Offers more camera options.
General 1
Digital Zoom - Use this option to enable or disable digital zoom.
•
White Balance - Change the camera white balance settings to suit the area.
•
Line Lock - Used to line lock the camera.
•
Line Phase - Can be used to manually adjust the line phase.
•
Video Gain - Used to adjust the video level to suit different lengths of coax cable.
•
•
Video Lift - Used to adjust the frequency of the video level to suit different lengths of coax cable.
Wide Dynamic - Enable WDR. Options available are ON, Auto and Off. Default is off.
•
General 2
•
Auto Flip - Use this option to set how the camera behaves when full tilt down is reached.
Semi - Requires a second tilt down command when at full tilt down to spin camera 180°.
Full - Automatically spins the camera 180°
•
Proportional - Automatically reduces/increases pan/tilt speed depending on zoom ratio.
•
Freeze Presets - This option freezes the image, when moving between presets.
•
Zoom Speed - Use to set prefered zoom speed, 5 is slow and 8 is fast.
•
OSD Preset Six - Go into OSD using preset 95 and you can switch off OSD access using preset 6.
Ambient Lighting - Sets how the camera will focus (when in mono) to suit the light source in the
•
scene. If this is set incorrectly the image may not be in focus.
•
PEL/VCL AF AI PTZ - Auto focus/iris will activate when PTZ is used, can be switched off. Default is
on. Pelco and VCL protocols only.
Night
•
Col/Mono Level - Col/Mono level settings can be changed to suit the site requirements. Options are
dark, medium and light. Default is dark. This sets when the camera goes into 'mono mode'.
•
Mono On - Range is 7 to 25. A lower value will set the level on when the scene is brighter, a higher
value will set the level on when the scene is darker.
•
Mono Off - Range is 1 to 20. A lower value will set the level off when the scene is brighter, a higher
value will set the level off when the scene is darker.
•
Brightness - Can be used to artificially brighten the image, options are low, medium and bright.
•
Bright Control - Options are automatic or preset seek activation.
(See also Special Presets page 14).
Noise Reduction - Used to reduce noise with scenes of low illumination. NR must be set to suit the
•
environment. Default is off.
Aperture - Can be used to increase the picture detail. Default is 10.
•
Shutter
Fast Shutter - Option to enable fast shutter and set speed of the shutter.
•
Slow Shutter - Option to alter the slow shutter speed. Altering this figure will have an effect on the low
•
light capabilities of the camera.
Text Field Menu
Navigate along alpha-numeric characters and use zoom in to select. Choose text position by inputting x and y
co-ordinates. Set text display to on, if required.
Servicing
•
Power Reset - This will reboot the camera, no settings will be lost.
•
Factory Reset - This will reboot the camera and all the settings will be lost.
•
Visiondome VR Software Version - This shows the software version of the camera.
© 360 Vision Technology Ltd.
Page 13