Miele G 1202 Manuale - Pagina 17

Sfoglia online o scarica il pdf Manuale per Lavastoviglie Miele G 1202. Miele G 1202 46.
Anche per Miele G 1202: Manuale (14 pagine)

Stampa la pagina

G 1xxx/G 2xxx

Options:

Note:

In models with software version ID –769, wait for the decimal point in the

display to switch off before pressing the GEL button.

Function

Software version ID check

Reset

Softener sensor activation/

Water hardness setting

Dispensed rinse aid

quantity setting

Buzzer on/off

Adjust Sensor Wash

program (ID nos. -984 and

later)

Programming

Do not press the GEL

button. The "GEL" LED is

off.

Press the GEL button

once. The "GEL" LED

flashes once quickly

intermittently. Press the

Program button to reset

all standard settings.

Press the GEL button 2x.

The "GEL" LED flashes 2x

quickly intermittently.

Press the Program button

as appropriate to make the

desired setting.

Press the GEL button 3x.

The "GEL" LED flashes 3x

quickly intermittently.

Press the Program button

as appropriate to make the

desired setting.

Press GEL 4x. The "GEL"

LED flashes 4x rapidly

intermittently. Press

Program to change the

setting.

Press the GEL button 5x.

The "GEL" LED flashes 5x

quickly intermittently.

Press the Program button

as appropriate to make the

desired setting.

Technical Information

Display

The display shows the software

version ID no. in consecutive digits

(e.g., -818).

This programmable function can be

used to reset all modifiable

parameters to their standard

settings. The display shows p and a

digit alternately: p0 = Non-standard

settings have been made; p1 = All

settings reset to standard settings

or no modifications made.

The display shows p and the digit/s

of the set value alternately. p0 =

Softener sensor active. Hardness

setting range: p1 to p70; see Table

12.

The display shows P and a digit

alternately: e.g., P3 (standard

setting) indicates a dispensed

quantity of 0.1 fl.oz. (3mL). Setting

range: 0 - 0.2 fl.oz. (0 - 6 mL).

The display shows P and a digit

alternately. Setting options: P0 =

Buzzer off; P1 = Buzzer on.

The display shows P and a digit

alternately. Setting options: P0 =

Standard program cycle (factory

setting); P1 = Adjusted program

cycle. The Sensor Wash program

can be adjusted in this parameter to

deal with stubborn soiling (if

otherwise low overall soiling). If this

option is selected, the main wash

temperature is increased to 131°F

and, as a result, the program

duration is extended.