Miele PG 8050i Manuale di istruzioni per l'installazione - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Lavastoviglie Miele PG 8050i. Miele PG 8050i 20. Professional dishwasher
Installation
3. Aligning the control panel
with the drawer fronts
^ The control panel can be aligned with
the drawer fronts of the kitchen
cabinets by adjusting the spacer
bars.
^ Using an 1/3" (8 mm) socket, turn the
nut clockwise or counterclockwise
until the spacers reach the required
height.
10
If necessary, individual (or all) spacer
bars can be removed.
^ To remove the spacer bars from the
control panel, place the panel on a
table, printed side up, and gently
push down on the spacer bars at a
point near the bottom of the control
panel. This will release the mounting
bolts from their slots.
Adjustment range
from 4 1/2" control panel with-
(112 mm):
out spacer bars,
to 5 3/4"
control panel with
(145 mm):
four spacer bars,
to 6"
using a fifth spacer bar
(154 mm):
(optional accessory).
After adjusting the control panel
height, cut off the plastic screw
excess.