Miele PG 8050i Installation Instructions Manual - Page 10
Browse online or download pdf Installation Instructions Manual for Dishwasher Miele PG 8050i. Miele PG 8050i 20 pages. Professional dishwasher
Print Page
Installation
3. Aligning the control panel
with the drawer fronts
^ The control panel can be aligned with
the drawer fronts of the kitchen
cabinets by adjusting the spacer
bars.
^ Using an 1/3" (8 mm) socket, turn the
nut clockwise or counterclockwise
until the spacers reach the required
height.
10
If necessary, individual (or all) spacer
bars can be removed.
^ To remove the spacer bars from the
control panel, place the panel on a
table, printed side up, and gently
push down on the spacer bars at a
point near the bottom of the control
panel. This will release the mounting
bolts from their slots.
Adjustment range
from 4 1/2" control panel with-
(112 mm):
out spacer bars,
to 5 3/4"
control panel with
(145 mm):
four spacer bars,
to 6"
using a fifth spacer bar
(154 mm):
(optional accessory).
After adjusting the control panel
height, cut off the plastic screw
excess.