Bürkert 0355 Manuale di istruzioni per l'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Unità di controllo Bürkert 0355. Bürkert 0355 12. 2/2- and 3/2-way solenoid valve

INSTALLATION

5.1

Safety instructions

DANGER!

Risk of injury from high pressure in the equipment!

▶ Before loosening the pipes and valves, turn off the pressure and

vent the lines.

Risk of injury due to electrical shock!

▶ Before reaching into the device or the equipment, switch off the

power supply and secure to prevent reactivation.

▶ Observe applicable accident prevention and safety regulations

for electrical equipment.

WARNING!

Risk of injury from improper installation!

▶ Installation may be carried out by authorized technicians only

and with the appropriate tools.

Risk of injury from unintentional activation of the system and an

uncontrolled restart!

▶ Secure system from unintentional activation.

▶ Following assembly, ensure a controlled restart.

5.2

Installation position: any, actuator preferably upwards.

Procedure:

→

Check pipelines for dirt and clean.

→

Install a dirt filter before the valve inlet (≤ 500 µm).

5.3

Installation

NOTE!

Caution risk of breakage!

• Do not use the coil as a lever arm.

→

Hold the device with a open-end wrench on the body and screw

into the pipeline.

Valve body must not be installed under tension.

→

Observe direction of flow:

The arrow on the body indicates the direction of flow.

english