Bürkert 0355 Kullanım Talimatları Kılavuzu - Sayfa 7
Kontrol Ünitesi Bürkert 0355 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Bürkert 0355 12 sayfaları. 2/2- and 3/2-way solenoid valve
Sayfayı Yazdır5
INSTALLATION
5.1
Safety instructions
DANGER!
Risk of injury from high pressure in the equipment!
▶ Before loosening the pipes and valves, turn off the pressure and
vent the lines.
Risk of injury due to electrical shock!
▶ Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations
for electrical equipment.
WARNING!
Risk of injury from improper installation!
▶ Installation may be carried out by authorized technicians only
and with the appropriate tools.
Risk of injury from unintentional activation of the system and an
uncontrolled restart!
▶ Secure system from unintentional activation.
▶ Following assembly, ensure a controlled restart.
5.2
Before installation
Installation position: any, actuator preferably upwards.
Procedure:
→
Check pipelines for dirt and clean.
→
Install a dirt filter before the valve inlet (≤ 500 µm).
5.3
Installation
NOTE!
Caution risk of breakage!
• Do not use the coil as a lever arm.
→
Hold the device with a open-end wrench on the body and screw
into the pipeline.
Valve body must not be installed under tension.
→
Observe direction of flow:
The arrow on the body indicates the direction of flow.
english
7