3A HEALTH CARE ASPEED 2 PROFESSIONAL Manuale di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature mediche 3A HEALTH CARE ASPEED 2 PROFESSIONAL. 3A HEALTH CARE ASPEED 2 PROFESSIONAL 9.

Stampa la pagina

IKH;E>FL

Excessive noise

The unit turns on but it does not suck

The vacuum value cannot be adjusted

The protection fuse is activated any

time the device is turned on

The vacuum gauge does not work

Ghm^3 Bg \Zl^ h_ ZghfZeb^l% fZe_ng\mbhgl Zg](hk ikh[e^fl ]b__^k^gm _khf ma^ hg^l eblm^] Z[ho^% ZepZrl \hgmZ\m hger

Znmahkbl^] ZllblmZg\^ \^gmk^l'

OZeb] _hk ,/ fhgmal lbg\^ ma^ ]Zm^ h_ ink\aZl^

- The device is guaranteed for 36 months from the date of purchase against any manufacturing or material flaws, as long as

it has not been altered by the client or non-authorised personnel.

- The warranty covers the replacement or the repair of the construction components.

- This warranty does not cover those parts subject to normal wear, the damage caused by misuse, falling, transport, lack of

maintenance, or any other cause that cannot be imputed to the manufacturer.

- 3A Health Care S.r.l declines any responsibility for direct or indirect damage due to misuse.

- In case of failure, the device, properly cleaned and packaged, must be immediately sent to your preferred retailer, attaching

this warranty certificate, filled-in as required, along with the receipt or the purchase invoice; otherwise the warranty will be

considered void and the repair will be charged.

- The shipping costs must be borne by the customer.

- 3A Health Care S.r.l is not responsible for further warranty extensions provided by third parties.

:MM>GMBHG3 MA> P:KK:GMR BL O:EB= HGER B? BM A:L ;>>G <HFIE>M>ER ?BEE>= BG :G= B? BM BL <HFIE>M>

MOD.: ASPEED 2

BATCH:____________________

DEFECT FOUND:_____________________________________________________

___________________________________________________________________________

IHLLB;E> <:NL>L

Damaged pump or obstructions in the

internal suction duct

- Damaged pump

- Vacuum regulator fully open.

Connection tubes unplugged and/

or not connected properly, damaged

connection tubes. Vial in a non-vertical

position, full or defective overflow

valve; possible obstruction of the

internal hydraulic circuit of the unit

Damage to the internal hydraulic

circuit or obstruction of the connection

tubes to the aspiration unit

Pump damaged or in short circuit.

Liquids penetrating in the pneumatic

circuit

P:KK:GMR

P:KK:GMR <HG=BMBHGL

PBMA K><>BIM(INK<A:L> BGOHB<>'

SERIAL NUMBER:______________________

MKHN;E>LAHHMBG@

Send to the customer care service

- Send to the customer care service

- Check the position of the vacuum

regulator. Check the integrity of the

tubes and their connections. Put the

vial in a vertical position, check the

overflow valve (blocked) and/or

replace the vial. Replace the silicon

tubes

Send to the customer care