3A HEALTH CARE ASPEED 2 PROFESSIONAL Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Медичне обладнання 3A HEALTH CARE ASPEED 2 PROFESSIONAL. 3A HEALTH CARE ASPEED 2 PROFESSIONAL 9 сторінок.

IKH;E>FL
Excessive noise
The unit turns on but it does not suck
The vacuum value cannot be adjusted
The protection fuse is activated any
time the device is turned on
The vacuum gauge does not work
Ghm^3 Bg \Zl^ h_ ZghfZeb^l% fZe_ng\mbhgl Zg](hk ikh[e^fl ]b__^k^gm _khf ma^ hg^l eblm^] Z[ho^% ZepZrl \hgmZ\m hger
Znmahkbl^] ZllblmZg\^ \^gmk^l'
OZeb] _hk ,/ fhgmal lbg\^ ma^ ]Zm^ h_ ink\aZl^
- The device is guaranteed for 36 months from the date of purchase against any manufacturing or material flaws, as long as
it has not been altered by the client or non-authorised personnel.
- The warranty covers the replacement or the repair of the construction components.
- This warranty does not cover those parts subject to normal wear, the damage caused by misuse, falling, transport, lack of
maintenance, or any other cause that cannot be imputed to the manufacturer.
- 3A Health Care S.r.l declines any responsibility for direct or indirect damage due to misuse.
- In case of failure, the device, properly cleaned and packaged, must be immediately sent to your preferred retailer, attaching
this warranty certificate, filled-in as required, along with the receipt or the purchase invoice; otherwise the warranty will be
considered void and the repair will be charged.
- The shipping costs must be borne by the customer.
- 3A Health Care S.r.l is not responsible for further warranty extensions provided by third parties.
:MM>GMBHG3 MA> P:KK:GMR BL O:EB= HGER B? BM A:L ;>>G <HFIE>M>ER ?BEE>= BG :G= B? BM BL <HFIE>M>
MOD.: ASPEED 2
BATCH:____________________
DEFECT FOUND:_____________________________________________________
___________________________________________________________________________
IHLLB;E> <:NL>L
Damaged pump or obstructions in the
internal suction duct
- Damaged pump
- Vacuum regulator fully open.
Connection tubes unplugged and/
or not connected properly, damaged
connection tubes. Vial in a non-vertical
position, full or defective overflow
valve; possible obstruction of the
internal hydraulic circuit of the unit
Damage to the internal hydraulic
circuit or obstruction of the connection
tubes to the aspiration unit
Pump damaged or in short circuit.
Liquids penetrating in the pneumatic
circuit
P:KK:GMR
P:KK:GMR <HG=BMBHGL
PBMA K><>BIM(INK<A:L> BGOHB<>'
SERIAL NUMBER:______________________
MKHN;E>LAHHMBG@
Send to the customer care service
- Send to the customer care service
- Check the position of the vacuum
regulator. Check the integrity of the
tubes and their connections. Put the
vial in a vertical position, check the
overflow valve (blocked) and/or
replace the vial. Replace the silicon
tubes
Send to the customer care
Send to the customer care
Send to the customer care