3A MEDES EASY-VAC EV-03 Manuale del prodotto - Pagina 4

Sfoglia online o scarica il pdf Manuale del prodotto per Macchine per la formatura sottovuoto 3A MEDES EASY-VAC EV-03. 3A MEDES EASY-VAC EV-03 4.

Stampa la pagina

Component

(구성품)

Specification

① Model : EV2

① Model : EV-03

② Power : AC 100~120V, 50~60Hz

AC 220~240V, 50~60HZ

③ Power Consumption : 1250W

③ Power Consumption : 550W

(Heater:550W Motor:1250W)

④ Dimension : 180 × 250 × 320 ㎜

⑤ Weight : 8kg

Operation

A. Preparation before use

① Select the sheet that best suits your purpose. (Temporary, Splint, retainer, bleaching, and so on)

② After connecting the power, check that the

heater

(Timer8: Turn clockwise to operate,

3-switch

B. How to use

① Hold the upper frame

handle

and turn it 180° counterclockwise to face backward.

② Turn the

timer8

clockwise and then press the

(At this time, the heater

lamp

is turned on and the

2 minutes and 30 seconds, and the condition may vary depending on the environment.)

③ Place the model in the center of the hole

plate6

④ Using the sliding handle2, lift up to the top of the hexagonal post.

⑤ Turn the release

handle5

clockwise to release the lock and lift it up.

⑥ Place the sheet you want to use on the lower sliding4, lower the upper

handle5

counterclockwise to fix it with the lower sliding3. (Only for square 127x127mm)

⑦ Hold the upper frame

handle

and turn it 180° clockwise to face the upper

(Do not touch the heated upper

frame1

with your hand)

⑧ When the fixed sheet is lowered to the height of the model or about 1/2, turn the upper frame handle

180° counterclockwise to face the upper

frame1

II, hold the sliding

⑨ After press

3-switch

handle2

contact with the main frame7.

(At this time, the

heater

is turned off and the motor is operated.)

⑩ Wait until the sheet is fully formed in the model, then turn off the

(About 10 to 60 seconds).

⑪ Wait until the sheet cools down (about 1 to 3 minutes), then turn the release

take out the molded sheet.

C. Management and storage methods

① Disconnect the power cable from the outlet

② After using, please make sure that the equipment is clean.

③ Do not place heavy objects on the upper frame.

④ Do not store this machine in a humid place.

AC 220~240V, 50~60HZ

(Heater:550W Pump:50W)

and motor are working properly.

: Press I -> Heater

on, Press II -> Sound)

lamp

3-switch

heater

is heated. The warm-up time is about

sliding3

and turn the release

frame1

forward.

backward.

and lower the sliding down until it is completely in

II.

3-switch

handle5

clockwise to

Caution

① There is a risk of burns because the heater area is heated after using this product.

② Do not disassemble or repair this product.

③ After using this product, must remove the power cable from outlet

④ Contact with sheet softening may cause sheet deformation and burns.

⑤ Do not use for other purposes.

Maintenance & Storage

① Please keep out of reach of children.

② Please use in a place separated from fire and water.

③ Temperature : -10 ~ 70

℃

④ Humidity : 10~100%

⑤ Pressure : 50~106kpa

Warrantee

This product has passed strict testing and inspection.

This product is warranted for 12 months from the date of purchase from us.

① This product will be repaired free of charge the performance and function defect that occurred under normal use

condition within the warranty period. If it cannot be repaired, we will replace it free for charge with a new product.

② Repair fee will be charged after the warranty period is expired.

③ In case of any of the following cases within the warranty period, repair fee will be charged.

F ailure caused by intention or negligence of the consumer.

•

F ailure caused by repair at a place not designated by us.

•

F ailure caused by power supply or faulty connecting devise.

•

O ther arbitrary disassembly, failure due to arbitrary alteration, etc.

•

Cleaning

Clean the product and each part with a soft cloth and air.

Customer Support Division

Please contact us if you have any mechanical problems.

Telephone : 82-31-909-8774

•

Fax

: 82-31-909-8773

•

Homepage : www.3amedes.co.kr

•