3A MEDES EASY-VAC EV-03 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Вакуумные формовочные машины 3A MEDES EASY-VAC EV-03. 3A MEDES EASY-VAC EV-03 4 страницы.

04
Component
(구성품)
Specification
① Model : EV2
① Model : EV-03
② Power : AC 100~120V, 50~60Hz
② Power : AC 100~120V, 50~60Hz
AC 220~240V, 50~60HZ
③ Power Consumption : 1250W
③ Power Consumption : 550W
(Heater:550W Motor:1250W)
④ Dimension : 180 × 250 × 320 ㎜
④ Dimension : 180 × 250 × 320 ㎜
⑤ Weight : 8kg
⑤ Weight : 8kg
05
Operation
A. Preparation before use
① Select the sheet that best suits your purpose. (Temporary, Splint, retainer, bleaching, and so on)
② After connecting the power, check that the
heater
(Timer8: Turn clockwise to operate,
3-switch
B. How to use
① Hold the upper frame
handle
and turn it 180° counterclockwise to face backward.
② Turn the
timer8
clockwise and then press the
(At this time, the heater
lamp
is turned on and the
2 minutes and 30 seconds, and the condition may vary depending on the environment.)
③ Place the model in the center of the hole
plate6
④ Using the sliding handle2, lift up to the top of the hexagonal post.
⑤ Turn the release
handle5
clockwise to release the lock and lift it up.
⑥ Place the sheet you want to use on the lower sliding4, lower the upper
handle5
counterclockwise to fix it with the lower sliding3. (Only for square 127x127mm)
⑦ Hold the upper frame
handle
and turn it 180° clockwise to face the upper
(Do not touch the heated upper
frame1
with your hand)
⑧ When the fixed sheet is lowered to the height of the model or about 1/2, turn the upper frame handle
180° counterclockwise to face the upper
frame1
II, hold the sliding
⑨ After press
3-switch
handle2
contact with the main frame7.
(At this time, the
heater
is turned off and the motor is operated.)
⑩ Wait until the sheet is fully formed in the model, then turn off the
(About 10 to 60 seconds).
⑪ Wait until the sheet cools down (about 1 to 3 minutes), then turn the release
take out the molded sheet.
C. Management and storage methods
① Disconnect the power cable from the outlet
② After using, please make sure that the equipment is clean.
③ Do not place heavy objects on the upper frame.
④ Do not store this machine in a humid place.
AC 220~240V, 50~60HZ
(Heater:550W Pump:50W)
and motor are working properly.
: Press I -> Heater
on, Press II -> Sound)
lamp
I.
3-switch
heater
is heated. The warm-up time is about
.
sliding3
and turn the release
frame1
forward.
backward.
and lower the sliding down until it is completely in
II.
3-switch
handle5
clockwise to
06
Caution
① There is a risk of burns because the heater area is heated after using this product.
② Do not disassemble or repair this product.
③ After using this product, must remove the power cable from outlet
④ Contact with sheet softening may cause sheet deformation and burns.
⑤ Do not use for other purposes.
07
Maintenance & Storage
① Please keep out of reach of children.
② Please use in a place separated from fire and water.
③ Temperature : -10 ~ 70
④ Humidity : 10~100%
⑤ Pressure : 50~106kpa
08
Warrantee
This product has passed strict testing and inspection.
This product is warranted for 12 months from the date of purchase from us.
① This product will be repaired free of charge the performance and function defect that occurred under normal use
condition within the warranty period. If it cannot be repaired, we will replace it free for charge with a new product.
② Repair fee will be charged after the warranty period is expired.
③ In case of any of the following cases within the warranty period, repair fee will be charged.
F ailure caused by intention or negligence of the consumer.
F ailure caused by repair at a place not designated by us.
F ailure caused by power supply or faulty connecting devise.
O ther arbitrary disassembly, failure due to arbitrary alteration, etc.
09
Cleaning
Clean the product and each part with a soft cloth and air.
10
Customer Support Division
Please contact us if you have any mechanical problems.
Telephone : 82-31-909-8774
Fax
: 82-31-909-8773
Homepage : www.3amedes.co.kr