Miller 301523 Manuale d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'uso per Accessori per la saldatura Miller 301523. Miller 301523 8. Deltaweld 350/500 running gear, migrunner kit
Stampa la pagina
3.
Attaching Swivel Bracket To Power Source
Tools Needed:
3/8, 5/16 in.
7
8
6
3
5
4
2
1
Screws From Top Of Power
Source (4)
Remove four screws from top of power
source.
.
Insulators and shoulder washers
must be installed.
2
Insulators
Place insulators on top of power source
3
Swivel Assembly
4
Swivel Mounting Bracket
Set swivel assembly on top of power
source. Align holes in swivel feet with
insulators and holes in power source.
.
Swivel assembly is setup for
Deltaweld 350 models. If using
Deltaweld 500 model, move the
two swivel brackets to the rear of
the swivel assembly.
5
Shoulder Washers
6
Screws From Hardware Kit (4)
Insert washers. Use four screws from
hardware kit to secure. Torque to 50
in. lb.
7
Pin
8
Screw 10-32
Insert screw and tighten.
1
287390-A
OM-287389 Page 3