Miller T94 Series Manuale - Pagina 13

Sfoglia online o scarica il pdf Manuale per Accessori per la saldatura Miller T94 Series. Miller T94 Series 32. Auto-darkening helmets
Anche per Miller T94 Series: Manuale d'uso (40 pagine)

Miller T94 Series Manuale

4-4. Mode Control Settings

2
1
1
Mode Button
2
External Grind Mode
Button
Press Mode button to select
the mode appropriate for the
work activity:
Weld Mode − used for most
welding applications. In this
mode the lens turns on
when it optically senses a
welding arc. Adjust shade,
sensitivity, and delay set-
tings as needed.
Cut Mode − used for cutting
applications. In this mode
the lens turns on when it op-
tically senses a cutting arc.
Adjust shade, sensitivity,
and delay settings as need-
ed.
If nearby objects may
!
inadvertently contact
the
external
Mode button while
you are welding, un-
plug the Grind Mode
button to prevent ac-
cidental activation of
the Grind mode.
Grind Mode − used for met-
al grinding applications. In
this mode the shade is fixed
shade No. 3. No lens adjust-
ments are possible.
Use external Grind Mode
button to select grinding
mode without raising hel-
met.
To use Grind mode, press
and hold the external Grind
button for two seconds.
Grind
Press Grind Mode button
again to turn off Grind mode.
X-Mode − used for outdoor
or low current welding ap-
plications. In this mode the
lens turns on when it senses
weld current. Adjust shade,
sensitivity, and delay set-
tings as needed.
.
Nearby welding may af-
fect helmet operation
when lens is in X-Mode.
Stay at least 12 ft (3.7
m) away from other
welding activity.
260482-2 / 260482-4
OM-255503 Page 11