Miller T94 Series Посібник - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник для Зварювальне приладдя Miller T94 Series. Miller T94 Series 32 сторінки. Auto-darkening helmets
Також для Miller T94 Series: Посібник користувача (40 сторінок)

Друкувати сторінку

4-4. Mode Control Settings

Mode Button

External Grind Mode

Button

Press Mode button to select

the mode appropriate for the

work activity:

Weld Mode − used for most

welding applications. In this

mode the lens turns on

when it optically senses a

welding arc. Adjust shade,

sensitivity, and delay set-

tings as needed.

Cut Mode − used for cutting

applications. In this mode

the lens turns on when it op-

tically senses a cutting arc.

Adjust shade, sensitivity,

and delay settings as need-

ed.

If nearby objects may

inadvertently contact

the

external

Mode button while

you are welding, un-

plug the Grind Mode

button to prevent ac-

cidental activation of

the Grind mode.

Grind Mode − used for met-

al grinding applications. In

this mode the shade is fixed

shade No. 3. No lens adjust-

ments are possible.

Use external Grind Mode

button to select grinding

mode without raising hel-

met.

To use Grind mode, press

and hold the external Grind

button for two seconds.

Grind

Press Grind Mode button

again to turn off Grind mode.

X-Mode − used for outdoor

or low current welding ap-

plications. In this mode the

lens turns on when it senses

weld current. Adjust shade,

sensitivity, and delay set-

tings as needed.

Nearby welding may af-

fect helmet operation

when lens is in X-Mode.

Stay at least 12 ft (3.7

m) away from other

welding activity.

260482-2 / 260482-4

OM-255503 Page 11